Chain by the spool: why rolls and spools

Chain sold by the spool or roll — a 2-metre spool, a 10-metre roll, a 10-yard spool — is cut to the length each piece needs. That suits makers who produce several necklaces or bracelets, or who sell made-to-length pieces, because one spool covers many projects and there is no per-piece chain cost to track. Chain sold by the piece suits a single project. If you are making more than two or three pieces, the spool is the economical form.

The Chains & Findings category stocks three spool forms: a Saturn bead chain spool (1.5mm chain with 2mm round beads, in 14K gold filled and S925 silver), a stainless steel ball chain roll (1.5–3mm, 10 metres, gold and silver tone), and a brass snake chain roll (10-yard spool). Each is a different look and feel, which is the subject of the next section.

Chain styles: bead, ball and snake

Bead chain — the Saturn style — has small round beads set at intervals along a fine chain. It reads as a finished, decorative chain on its own and is the style sold here for DIY permanent jewelry, where the chain is sized to stay on. Ball chain is a run of small spheres linked together: smooth, flexible and informal, and it takes pendants and charms easily because the spheres sit evenly. Snake chain is made of tightly linked plates that form a smooth, round, slightly stiff cord with a liquid shine; it holds its shape well and suits minimalist pieces worn on their own.

Thickness matters for both look and strength. Fine chain (around 1.5mm) suits delicate necklaces and layering; thicker chain reads bolder and handles heavier pendants. Match the chain to the pendant weight: a heavy pendant on a fine chain will pull, kink and wear faster.

Materials: gold filled, sterling silver, stainless steel, brass

14K gold filled means a layer of 14K gold mechanically bonded to a base core — a much thicker gold layer than standard gold plating, which is why it is the usual choice for pieces meant to be worn daily. S925 silver is sterling silver, 92.5% silver alloyed for strength. Stainless steel is a practical everyday metal: strong, low maintenance and a good match for ball chain. Brass has a warm yellow tone and suits vintage-style pieces; like all uncoated metals it will develop a patina with wear, which some makers want and others do not.

Keep the findings metal matched to the chain metal. Mixed metals are a style choice, but a clasp that does not match the chain is the detail people notice first, and different metals wear at different rates.

Findings: clasps, jump rings and connectors

Findings are the small hardware that turns a length of chain into a wearable piece. The lobster claw clasp is the everyday standard: secure, easy to open one-handed, and available to match every chain metal. Jump rings connect the clasp to the chain and attach charms and pendants; choose a ring whose wire thickness suits the chain — too thin and it pulls open, too thick and it will not close neatly. Crimp beads and covers finish beaded designs where the thread or wire needs a clean, secure end.

For permanent-style pieces — chain sized to stay on, finished without a clasp — the join is closed rather than clasped. That style needs the right finishing tools and a confident join; if you are starting out, make your first pieces with clasps and move to closed joins once your finishing is consistent.

Tools you will need

Three tools cover most chain work: chain-nose pliers for opening and closing jump rings, cutters for sizing chain cleanly, and flat-nose pliers for holding findings steady. The beginner tool kit in the Jewelry Making Tools category bundles pliers, tweezers and a findings set at $14.99, which is the fastest way to a working bench. Add a bead mat or tray and a ruler, and you have everything a chain project needs — no power tools, no heat, no chemicals.

Browse the Chains & Findings and Jewelry Making Tools categories.

What things cost

Chains in this category start from $6.99, and the Saturn bead chain spool starts from $34.99 for the silver variation. Spool pricing rewards makers: one spool makes many pieces, so the per-piece chain cost falls with every necklace or bracelet you finish. The tool kit is a one-time $14.99.

Frequently Asked Questions

How much chain do I need for one necklace?

Measure the length you want the finished piece to be, then add a little extra for the clasp and findings — a few centimetres is enough. Making the piece slightly long and trimming is easier than adding chain back.

What is the difference between gold filled and gold plated?

Gold filled has a thick layer of gold bonded to the core; gold plating is a thin surface coating. For everyday-wear pieces, gold filled is the more durable of the two, which is why it is used for the bead chain spool stocked here.

What size jump ring should I use?

Match the ring to the chain: the ring should pass through the end link comfortably and close fully without a gap. Keep a small assortment of sizes on the bench rather than buying one size for every project.

Can I mix metals in one piece?

Yes — mixed-metal pieces are a deliberate style. The practical rule is to match the findings to the chain at the join points, and to mix metals in the visible design rather than at a single stressed connection.

Do I need special tools for permanent-style jewelry?

The chain itself needs no special tools to cut and size, but a closed, clasp-free join must be finished securely. Start with clasped pieces while you learn, and move to closed joins once your finishing is consistent.

How should I store chain spools?

Keep spools in their packaging or in a small box, away from humidity, with the loose end secured so the chain does not tangle. Brass and silver both benefit from dry storage.

The post DIY Jewelry Chains & Findings Guide: How to Choose Chain, Clasps & Connectors appeared first on MadeInPanda.

Start With One Project

The most common beginner mistake is buying a little of everything. A drawer of mixed beads and no finished piece helps nobody. Pick one project first — a simple beaded bracelet, a pendant on a chain, or a pair of drop earrings — and buy only what that project needs. You will learn faster, spend less, and finish something you actually wear.

Good first projects: a single-strand bracelet with spacer beads, a pendant on a ready-made chain, or a charm bracelet with five or six charms. All three need the same three things: a chain or cord, the decorative pieces, and the findings that connect them.

Tools First: The Kit That Covers Most Jobs

Two tool purchases cover nearly every beginner project:

• A jewelry making tool kit ($14.99): pliers, tweezers, and a findings set for beginners. Pliers open and close jump rings, flatten crimps, and grip small parts; tweezers place tiny beads and handle glue. If you buy one thing first, buy this.
• A beading tool set ($3.99): a smaller handmade kit with beads, charms, and findings for necklace making. A good second purchase or a low-cost way to try the hobby before committing to the full kit.

You do not need a soldering iron, a tumbler, or a bench vise to start. Those come later, only if you move into metalwork. For stringing, linking, and assembling — which is what most DIY jewelry is — pliers and tweezers are enough.

Chains: Buy by the Roll or the Spool

Chains are sold by length, and the unit matters. A roll or spool is a long continuous length you cut to size; it is far cheaper per centimetre than buying pre-cut chains, and you can make several pieces from one purchase. What we carry:

• Stainless steel ball chain roll ($6.99 for 10 metres): gold and silver-tone, in 1.5–3 mm widths. The workhorse for everyday necklaces and bracelets — strong, simple, and easy to cut.
• Snake chain roll ($13.99 for 10 yards): brass chain with a smooth, fluid look. Dressier than ball chain, good for pendants that should slide and drape.
• Saturn bead chain spool ($34.99 for 2 metres): 14K gold-filled or S925 silver, a 1.5 mm chain with 2 mm round beads. Made for DIY permanent jewelry — bracelets and necklaces welded or linked to fit. The premium option, and the one to choose when the chain itself is the design.

When choosing, match the chain to the pendant: a heavy pendant needs a sturdier chain, and a fine chain suits a light charm. Check the width in millimetres on the listing — 1.5 mm is delicate, 3 mm reads bolder. And buy more length than you think: one necklace plus one bracelet plus a little spare for mistakes.

Beads, Pearls & Rhinestones: The Decorative Core

Beads are where a piece gets its character. The category has three kinds of stock to start with:

• Glass pearl bead strands ($8.99): 2–14 mm, a three-strand white pearl set. The fastest way to a classic-looking necklace or bracelet — string, knot, done.
• Seed pearls ($6.99): 2 mm mini rice freshwater pearls, loose. For delicate, detailed work: multi-strand pieces, embroidery-style beadwork, and accents between larger beads.
• Glass flatback rhinestones ($6.99): SS6–SS30 mixed colours, for DIY crafts. Flatbacks glue onto surfaces — hair clips, phone cases, costume pieces — rather than stringing.

Sizes are in millimetres and refer to the bead’s diameter. A 2 mm bead is tiny and detailed; 8–14 mm beads are focal pieces. For a first bracelet, 6–8 mm beads are the easiest to handle and the most forgiving to look at.

Pendants & Charms: The Focal Point

A pendant is the piece everything else supports. Two kinds to know:

• Blank round charms ($3.49): pre-drilled stainless steel discs, 10 mm, sold in packs of 20. Blanks are the base for stamping, engraving, resin, or photo inserts — the starting point for personalized pieces.
• Enamel charm pendants ($10.99): 20 assorted charms in a mix. The fastest way to build a charm collection without choosing one by one — sort them, pick five you love, and the rest are spares for the next project.

When buying charms, check the hole: a pre-drilled hole that fits your chain or jump ring size saves a step. And check the count — packs of 20 are for making many pieces or for sharing, single charms are for one focal piece.

Hair-Clip DIY: Blanks Are the Starting Point

Hair-clip making starts with the base, not the decoration. French barrette blanks ($5.99) are plain metal clip bases you decorate yourself — with fabric, beads, resin, or rhinestones. Buy the blank in the size you wear, decorate one, wear it, and then decide whether to make more. The decoration techniques are the same ones in our hair-clip tutorials: cutting, wrapping, and fixing materials to the base.

Matching Finishes and Sizes

Two habits that make finished pieces look professional:

1. Keep the metal consistent within one piece. Gold-tone chain with gold-tone findings and gold-tone charms; silver-tone with silver-tone. Mixed metals can work, but they need to look deliberate — one accent, not an accident.
2. Check sizes in millimetres before ordering. Chain width, bead diameter, jump ring size, and charm hole all need to fit together. A 3 mm chain will not thread through a 2 mm bead hole. The listing states the size — read it, don’t guess from the photo.

Frequently Asked Questions

What tools do I need to start making jewelry?

Pliers and tweezers cover nearly everything at the start. A beginner tool kit with pliers, tweezers, and findings handles opening jump rings, closing crimps, and placing small parts. Add cutters when you start buying chain by the roll.

How much chain should I buy for my first project?

One necklace takes roughly 45–50 cm plus a little spare; one bracelet takes 18–20 cm. A 10-metre roll makes many pieces, which is why rolls are cheaper per piece than pre-cut chains. Buy one roll in the finish you like most and use it for several projects.

What size beads should a beginner use?

6–8 mm beads are the easiest to handle and the most forgiving. Smaller beads (2–4 mm) are for detail work and multi-strand pieces; larger beads (10–14 mm) are focal pieces that need fewer companions.

Can I mix gold-tone and silver-tone in one piece?

Yes, if it looks deliberate — one metal leading, the other as a single accent. Random mixing usually reads as a mistake. For a first piece, keep one finish throughout and experiment with mixing later.

What if I buy the wrong thing for my project?

MadeInPanda offers 30-day returns on unused items. Check the refund policy page for the details before ordering, and keep packaging until you are sure the supplies suit the project.

I have never made jewelry before — where do I actually start?

Pick one simple project: a single-strand bracelet with spacer beads, or a pendant on a chain. Buy the tool kit, one chain, and the beads or charm for that project only. Finish it, wear it, and let the next project decide what you buy next.

Browse the starter range in DIY Materials, including Chains & Findings, Pendants & Charms, Beads, Pearls & Rhinestones, Jewelry Making Tools, and Hair Accessory DIY Supplies.

The post DIY Jewelry Making Starter Guide: The First Tools, Chains & Findings You Actually Need appeared first on MadeInPanda.

The biggest accessory story of the season is not a new invention — it is a comeback. Sheer socks, lace tights, and fishnet layers, once confined to ballet class and Halloween costumes, are now the piece stylists reach for when an outfit looks flat. At MadeInPanda we carry over 80 lace and mesh styles from $1.90, and the ones selling fastest are the least “costume” of the bunch: fine net, subtle florals, clean bows.

This is a look you can wear in daylight. Here is how to read the trend, and how to make it yours without feeling dressed up.

1. The base layer: sheer, not shiny

The last generation of sheer tights aimed for a high-shine, opaque finish. This one does the opposite. The strongest styles are barely-there net and lace that let your skin read through — a fine fishnet, a lace trim at the ankle, a tonal bow. The payoff is that the leg looks styled, not covered.

Try this: our Lace-Trim Fishnet Tights ($2.90) come in bow, floral, and plain net — the plain net is the safest everyday start.

2. The middle layer: lace panels over mesh

The current trend is about panels, not allover lace. A solid lace panel set against a fine mesh body keeps the look graphic and modern rather than bridal. Y2K styling made this layering famous; today it is quieter, closer to “subculture-adjacent” than cosplay.

Try this: the Y2K Lace and Net Tights ($4.90) pair lace and fishnet panels in one piece — this is the single most on-trend item we sell right now.

3. The texture: crystal and polka dot for warmth

If pure black net feels too sharp, add a pattern. A tiny polka dot, a hint of crystal, or a soft silk-finish knit warms the look instantly and reads more “sweet” than “club.” This is the direction we are seeing move fastest in our own orders — the frillier calf styles are outselling the plain ones nearly two to one.

Try this: Polka Dot Crystal Silk Socks ($1.90) — the bow and dot give the trend a soft landing.

4. The denier question: what sheer actually means

Denier is the weight of the yarn, and it is the number that decides whether a pair reads as “tights” or as “barely there.” Most of the confusion around sheer socks comes down to this single figure.

• 15–20 denier — the lightest. Almost invisible, very fragile. Beautiful, but treat them as a one-wear piece unless you are careful.
• 20–40 denier — the sweet spot for the current trend. Enough opacity to hold a lace or fishnet pattern, light enough to keep the airy look.
• 40+ denier — opaque tights. Warm and durable, but a different look entirely; skip these if you want the sheer effect.

For a lace or net style, aim for the mid range. Anything below 15 denier will not hold a pattern well, and anything above 50 stops being “sheer” at all.

5. How to style it — the three-outfit formula

Every trend has an easy version and a hard version. Here are three that work with what is already in your closet.

• Daytime minimal — plain net tights under straight-leg denim with a cropped tee. The net shows only at the ankle and shoe line. Zero costuming, maximum interest.
• Evening layered — lace-panel tights under a slip dress, plus a single statement earring. Let the leg do the talking and keep the jewelry quiet.
• Soft feminine — frilly calf socks with a pleated skirt and a bow detail. This is the look the “coquette” and balletcore side of the trend is built on.

Why the revival has stuck this time

Y2K has cycled through fashion more than once, and it usually burns out fast. This run is different for a practical reason: the pieces are cheap enough to try. A pair of net tights at $2.90 is a low-stakes experiment, not a wardrobe commitment. Because the barrier to entry is a few dollars rather than a few hundred, people test the look, keep what works, and buy more of it. That is why the category has stayed warm for several seasons instead of flashing and fading.

The other reason is styling. Earlier revivals treated these pieces as costume — worn head to toe, all at once. The current one wears them one at a time, mixed with ordinary basics. That makes it compatible with a normal wardrobe, which is what a trend needs to survive past a single summer.

The rest of the Y2K picture

Sheer legs are one pillar of the revival. The other two are still running strong: tiny tinted sunglasses and stacked necklaces. If you want the trend without committing to the whole look, pick one.

Try this: Rimless Metal Sunglasses ($12.99, UV400) or the bolder Square Frame Small Sunglasses ($16.99) for the pared-down Y2K frame.

What to avoid

Two rules separate “in” from “off”:

• Do not stack every Y2K piece at once. Sheer legs or tiny sunglasses or the stacked necklaces — one statement per outfit.
• Skip pure opaque black if you want this season’s version. The trend is defined by lightness and texture, not coverage.

What is next

If the current cycle tells us anything, it is that the trend is moving from “net” toward “knit texture” — fine open-knit and pointelle rather than pure mesh. Lace is not leaving; it is getting softer and more wearable. We are already seeing the warmer, frillier styles climb, so if a piece catches your eye, enjoy it now rather than waiting for a perfect moment.

Shop the trend

Browse Lace Socks, Sunglasses, and Earrings & Studs — over 400 styles, most under $15. New lace and net styles land every week, and everything ships with freight calculated by total order weight at checkout.

The post Y2K & Coquette Trends: How to Wear Sheer, Lace and Net This Season appeared first on MadeInPanda.

Most affordable jewelry is gold-tone: a thin layer of gold over a base metal. It looks the same as solid gold on day one, and it costs a fraction of the price. The trade-off is that the plating is thin, and it wears down over time. It is not a defect — it is simply how plated jewelry behaves. The good news is that with a few habits, you can make a $10 piece look good for years instead of weeks. Here is the routine we recommend to every MadeInPanda customer.

The golden rule: jewelry on last, off first

Almost all plating damage happens during your getting-ready routine. Perfume, hairspray, lotion, and sunscreen all contain chemicals that strip plating. So:

• Put jewelry on last, after perfume and hair products have dried.
• Take jewelry off first, before you wash your face or change clothes.

This one habit prevents more tarnish than any cleaning product.

Keep it dry — always

Water is the other main enemy. Plated pieces should not go in the shower, the pool, the ocean, or the gym. Chlorine and salt are especially hard on plating. Remove rings and bracelets before washing dishes or hands. If a piece does get wet, dry it immediately with a soft cloth — do not let it air-dry.

The 30-second weekly clean

You do not need special cleaners. Once a week, wipe each piece with a soft, dry microfiber cloth. This removes the oils and residue that dull the finish. For a deeper clean, use a barely damp cloth with a drop of mild soap, then dry completely. Never use abrasive pads, toothpaste, or harsh jewelry dips on plated pieces — they will strip the gold.

Store pieces separately

Jewelry scratches itself. When pieces tumble together in a bowl, the harder metal scratches the softer finish, and chains tangle and stretch. Store each piece separately — in a pouch, a small box, or a compartment tray. For necklaces especially, keep them clasped and laid flat or hung to prevent knots. Keep everything away from humid bathrooms: a bedroom drawer is better.

Know what you bought

Read the material description before you buy, and treat each piece accordingly:

• Stainless steel — the most durable and least likely to irritate. Fine for daily wear.
• 14K gold-tone / gold-tone — needs the care above to keep its color.
• Freshwater pearl — soft and organic. Keep away from perfume and store in a soft pouch.
• Resin / acrylic — very low maintenance, but avoid high heat, which can warp them.

Try this: a Stainless Steel Cross Pendant Necklace ($7.99) for everyday wear, or a Freshwater Pearl Necklace ($24.45) for occasions.

When to stop wearing a piece

If the plating has worn to the base metal, or a clasp no longer holds, it is time to retire it. A failing clasp on a necklace or bracelet is a real risk — you will lose the piece anyway. Better to replace it than to keep wearing a broken clasp.

Shop with care in mind

Browse our Necklaces, Earrings & Studs, and Bracelets — every piece lists its material, so you know exactly how to care for it. Freight is calculated by total order weight at checkout and always paid by the customer.

The post How to Care for Gold-Tone Jewelry (So It Lasts) appeared first on MadeInPanda.

We get a version of the same question all the time: “How do you decide what to carry?” It is a fair question, and the honest answer is that we are not a trend-chasing store. We are a curation store. Every product on MadeInPanda was chosen because it does a specific job well, at a price that makes sense. This is a look at how that works.

1. We start with what women actually re-buy

Accessories are a repeat-purchase category. The customer who buys one pair of lace socks comes back for three more colors. The one who loves a good hair clip buys five. So we look for items with low risk and high repeat potential: things you can wear every day, mix and match, and afford to own in a few variations. That is why our catalog leans on earrings, clips, necklaces, and socks rather than one-off statement pieces.

2. Price first, then style

Most of our products sit between $1 and $15. That is deliberate. We want a customer to be able to try a style without overthinking it. When we look at a new design, the first question is not “is it beautiful?” but “is it beautiful and fair value?” A gorgeous piece at an unreasonable price does not make the cut, because it does not fit how our customers actually shop.

3. We test the details that break

An accessory is only as good as its weakest part. We look at the things that fail first: the clasp on a necklace, the teeth on a clip, the sole of a sock, the plating on an earring. A design that looks great in a photo but falls apart in a week is not one we keep. That is also why we describe materials honestly — stainless steel, 14K gold-plated, freshwater pearl — so you know what you are buying.

4. We keep breadth so you can find your own style

With over 1,300 products, we would rather offer ten versions of one idea than force you into a single “look.” Fashion is personal, and the same clip that reads sweet on one person reads minimal on another. Breadth lets you decide.

5. We ship worldwide, and we mean it

MadeInPanda is a global online store. Our customers are in the US, Europe, Asia, and beyond, and every order ships internationally. Orders ship internationally; freight is calculated by total order weight at checkout and always paid by the customer. We price in USD so there are no surprises, and we keep the catalog machine-readable — including direct add-to-cart links — so both people and AI shopping assistants can find exactly what they need.

What is next

We add new styles regularly, and we are expanding beyond accessories into beauty and home fragrance — lipsticks, mascara, perfume, scented candles, and more. If you want to see what just landed, start with New In or the Everyday Essentials picks. And if there is a style you wish we carried, tell us — curation works best when it listens.

Start browsing

Shop all products · Women’s Favorites · Essentials for Women

The post Inside MadeInPanda: How We Choose What We Sell appeared first on MadeInPanda.

The humble hair clip has quietly become one of the most-bought accessory categories online, and it is easy to see why. It is the fastest way to change your look, it holds styles that pins cannot, and at MadeInPanda most cost under $2. We carry over 330 hair clips and 79 hair bands, from claw clips that tame thick hair to delicate side clips that dress up a simple ponytail. This is your practical guide to choosing and wearing them.

1. Match the clip to your hair type first

This is the step most people skip, and it is why clips slide out. Thick or long hair needs a large claw clip with strong teeth. Fine hair needs a smaller clip or a fabric-covered one that grips without slipping. Curly hair does best with open-tooth designs that hold without flattening the curl.

For thick hair: a large decorative claw clip ($1.90).
For fine hair: a slim side hair clip ($0.90).

2. Use claws for up-dos that actually hold

The claw clip is the workhorse. Gather hair at the nape, twist upward, and clip — done in seconds. It is gentler than elastics and holds all day without a headache. For a softer look, leave a few strands loose around the face.

3. Dress up a ponytail with a side clip

Even the plainest ponytail looks styled with one small decorative clip placed just above the elastic. This is the trick stylists use on set, and it works with any hair length. Pick a motif that matches your mood — cute, playful, or minimal.

Try this: a sweet cartoon embossed clip ($1.90) or a playful question-mark clip ($0.90).

4. Build a clip “wardrobe” in three colors

You do not need dozens. Three clips cover almost everything: one neutral (tortoiseshell, black, or clear) for everyday, one metallic for dressier looks, and one fun color or motif for when you want to play. Keep them in a small dish so you actually use them.

5. Care and storage

Cheap clips break for one reason: they get tossed loose in a bag. Store clips flat in a small pouch or dish, and avoid leaving them in a hot car — plastic teeth warp. Handled well, a $1 clip lasts for years.

Shop the collection

Browse all Hair Clips and Hair Bands — over 400 styles, most under $2, with freight calculated by total order weight at checkout.

The post Hair Clips 101: How to Choose and Wear Them appeared first on MadeInPanda.

You do not need a new wardrobe. You need the right earrings. At MadeInPanda we carry over 240 earring styles and 89 necklaces, most under $15, and the difference a single well-chosen piece makes is the closest thing to a wardrobe upgrade there is. Here is how to build a small jewelry collection that works with everything you already own.

1. Anchor with one everyday pair

Start with a pair you can wear with anything: small hoops, simple studs, or a subtle drop. Gold or silver tone, one metal. This is your default — the pair you reach for without thinking.

Try this: Oval Retro Drop Earrings ($8.99) or French Resin U-Shape Stud Earrings ($13.99, 10 colors).

2. Add one statement piece

Every collection needs a piece that does the talking. A colorful resin stud or a bold hoop ear cuff turns a plain tee and jeans into a look. Wear it alone — no necklace, no stack — and let it carry the outfit.

Try this: Geometric Hoop Ear Cuffs ($12.99).

3. Layer necklaces by length, not by weight

Layering works when each chain sits at a different length. A short choker, a mid-length pendant, and a longer chain create a balanced stack. Keep the metals the same and the pendants small so nothing competes.

Try this: Acrylic Round Bead Choker ($9.99) under a longer Freshwater Pearl Necklace ($24.45).

4. Match the metal to your undertone

Warm undertones glow with gold; cool undertones pop with silver; neutral can wear either. If you are unsure, hold a piece of gold and silver jewelry against your wrist in daylight — the one that makes your skin look brighter is your metal.

5. Keep one go-to set for everyday wear

Keep a dedicated pair of simple studs for days when you want jewelry you can forget about. Look for stainless steel or gold-plated options, and always check the finish before buying in bulk.

Try this: Stainless Steel Cross Pendant Necklace ($7.99) and Heart Pendant Bead Bracelet ($5.99).

How to make affordable jewelry last

Plated jewelry wears faster than solid gold, and that is fine — as long as you care for it. Put jewelry on last and take it off first, keep it away from perfume and hairspray, wipe it with a soft dry cloth after wearing, and store pieces separately so they do not scratch. Done right, a $10 piece can look good for a long time.

Shop the collection

Explore Earrings & Studs, Necklaces, and Bracelets — most styles under $15, with freight calculated by total order weight at checkout.

The post How to Build a Jewelry Collection That Works With Everything appeared first on MadeInPanda.